Features
●Multi support layer enhances dirt holding capacity
●Excellent membrane structure increase the contaminant removal efficiency
●PP core provides excellent strength of cartridge filter
●Grade design improve the flow rate
●Long service life
Application
●Food and beverage
●Electronic
●Chemical solvents
●Pharmaceutical
Regulation compliance
●FDA CFR 21
●ISO 9001:2008
●EC Number 1935/2004
●Regulation (EU) Number 10/2011
Specification
Materials of Construction | |
Filter Media |
Polypropylene/Glass Fiber |
End Caps |
Polypropylene |
Core |
Polypropylene |
End Cap |
222 Flat/222 Fin/226 Flat/226 Fin/DOE |
O-Rings |
Silicone/EPDM/Viton/NBR |
Dimensions(Nominal) | |
Nominal Outside Diameter : |
2.68inch/68±1(mm) |
Nominal Inside Diameter |
1.26inch/32(mm) |
Length |
10inch,20inch,30inch,40inch, |
Micron Ratings |
0.1μm,0.2μm,0.45μm,1μm,3μm,5μm,10μm,20μm,30μm,50μm |
Operating Condition | |
Maximum Temperature: |
180℉ (82 ℃) |
Maximum Pressure: |
58psi (4bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Flow rate and pressure drop:
Order Information
For Example: DFPPH 02 - 40 B S | |||||||
DFPP |
Series |
Rating |
- |
Length |
End Cap |
O-Ring |
Material |
Delta Filtration PP Pleated |
H=Poly Pleat H |
01=0.1μm |
NA |
10=10inch |
A=222/Flat |
S=Silicone |
Blank=Polypropylene G=Glass Fiber |
http://www.delta-filtration.com/